24 Hour Emergency Plumbing Service. Locally Owned & Operated. Serving the Northern Virginia area for over 30 Years

Taking Care of Plumbing in the Winter

The winter months can be a tough time for your home’s plumbing system. When freezing temperatures and major storms hit your area, your pipes, water heater, and other plumbing units may experience excess wear and tear. To avoid a burst pipe or other winter plumbing emergency, you will want to take the time to perform seasonal plumbing maintenance for your home. Read on to review some essential winter plumbing maintenance tips.

Insulate Exposed Pipes

Any pipes that are exposed to outdoor temperatures could be at risk of freezing during the winter months. When water freezes and expands in a pipe, the walls of the pipe may end up bursting. Insulating exposed pipes is an effective strategy for preventing major plumbing leaks that are caused by freezing temperatures.

Maintain Your Water Heater

During the winter season, you will use hot water for many tasks and chores around the home. To take care of your plumbing this winter, you may want to hire a plumber to provide you with seasonal maintenance for your water. Your plumber can check your water heater’s heating elements and make sure that it is operating efficiently. It may also be necessary to add extra insulation to your water heater during the winter.

Turn Off Outdoor Fixtures

Outdoor fixtures can be particularly vulnerable to winter weather conditions. In order to make sure that your plumbing does not become damaged during the winter season, you may want to turn off the water source to any plumbing fixtures that are located on the exterior or your home. Taking the time to shut off your outdoor water supply will help you to avoid a plumbing emergency this winter.

If you are in need of plumbing services this winter, be sure to get in touch with All Plumbing Inc. We offer top quality plumbing services in Arlington, and we can help you make sure that you are protected from a water main break during the winter season. Give us a call at (703) 525-7973 to schedule professional plumbing services today.

Handling a Water Main Break

A water main break is a serious plumbing emergency for any household. When you notice the signs that your water main has broken or burst, it is vital to act fast and get in touch with your emergency plumber. While you wait for help to arrive, there are a few steps that you can take to help reduce the damage that is done to your home. Let’s review the steps of handling a water main break on your property.

Call the Professionals

The first step that you will want to take immediately after you notice a water main break on your property is to call a professional plumbing company. Your plumbers will have the tools that are needed to fix the break and repair your broken water main. A plumber that offers 24/7 services will be on call to immediately respond to your emergency.

Shut Off Your Water Supply

If possible, you will want to shut off the main water supply to your home while you are waiting for help to arrive. The main water valve to a home is typically located in a basement or other out-of-the-way location. Once you have identified your main water valve, you can turn it off by switching its lever to the off position.

Mitigate Water Damage

A water main break can cause serious and costly water damage to your entire household. To avoid the expense and hassle of water damage, you will want to take any steps that you can to mitigate the amount of water damage that is caused by the broken main. For example, you may want to remove any books, clothing, or fragile items from the damaged area.

At All Plumbing Inc., our company specializes in emergency plumbing services. Whether you need help fixing your broken water heater, or you are coping with a burst water main, our team of friendly technicians will be there to assist you. To hire a plumber serving Arlington, give our offices a call at (703) 525-7973.

Keeping Your Kitchen Sink Clear

One of your daily chores should concern your kitchen sink, especially since this area is a large source of household bacteria and other germs. By keeping your kitchen sink clear—through regular garbage disposal use and daily cleanings—you can prevent your kitchen sink and pipes from smelling and becoming prematurely damaged, which will make it necessary to call your plumber. Keep reading for tips on how to keep your kitchen sink clear.

When you finish eating a meal, and there is food leftover, clean it off into the trashcan. Scrape off as much as possible before cleaning the dish in the sink. This will prevent unnecessary buildup in your garbage disposal, which may warrant future garbage disposal repair. Wipe down your sink every day with a mild detergent to prevent bacteria and mold growth, which can cause a smelly drain. If you notice any odd smells or sounds, call your local plumber to inspect the sink and pipes.

Call All Plumbing, Inc. at (703) 525-7973 when you need garbage disposal repair in Arlington, VA. We have over 40 years in business as one of Arlington’s top plumbing companies, so we can locate the problem and fix it quickly.

Making Your Bathroom Eco-Friendly

If you are concerned about your water usage and eco-friendly habits in the bathroom, then the attached video can help you make your bathroom eco-friendlier. Work with your plumber to install specific plumbing fixtures—such as low-flow toilets and showerheads—to keep your water usage low. Let’s look at other ways to make your bathroom eco-friendly.

In addition to working with your residential plumber to update your plumbing fixtures, you can use all-natural cleaning products to wipe down your countertops and floors. You can also keep a potted plant to help filter out chemicals and toxins. These are just a few ways to make your bathroom and your entire house more eco-friendly and comfortable.

Work with your residential plumber near Arlington, VA to achieve maximum water conservation in your bathroom oasis. We at All Plumbing, Inc. have many plumbing services to share with you, so do not hesitate to call us at (703) 525-7973 to learn more.

What to Do About Smelly Drains

Smelly drains often occur in the kitchen, where the garbage disposal collects most food. However, you can have a smelly drain in your bathroom too. No matter where you notice a smelly drain, it is best to follow these steps and call your plumber right away.‚Äč

Inspect the Area

If you notice a distinct smell coming out of your drains, then the first step is to inspect the surrounding area for what that smell might be. If you have a trashcan near the sink, then the smell may be coming from that. You may also be smelling something under the sink, possibly a leaky pipe that has caused mold growth. If you locate mold growth, a leaky pipe, or another water source causing the smell, then call your residential plumber to inspect the area and possibly suggest waterproofing ideas.

Use Mild Detergents

A smelly drain, especially one located in the kitchen, may have built-up food particles and oily residue that can cause a bad smell. Always run your garbage disposal after cleaning dishes, and be sure to throw as much leftover food in the trashcan as possible before putting it in the disposal. If you already follow these guidelines, then you may try a mild detergent of lemon and vinegar to deodorize your disposal. However, if the smell returns, then call your plumber to inspect the unit for damages.

Call a Plumber

When in doubt, it is always best to call your local plumber for smelly drains and leaking pipes. It is safer to trust all plumbing concerns with the trained experts who can locate and correct the problem. If you attempt to locate the source of a smelly drain through the pipes, then you risk damaging your plumbing. These damages can result in much higher repair costs than if you had called a plumber when you first noticed the smelly drain.

Trust your expert plumbers serving Arlington, VA by calling All Plumbing, Inc. at (703) 525-7973. We can locate the source of your smelly drain and fix the problem with minimal cost to you.

Tips for Saving Water in the Shower

It is always important to conserve water however you can because it helps the environment and saves you money. Continue reading for some helpful tips about saving water in the shower, brought to you by your local plumber.

Tip #1: Reduce Shower Time

One of the easiest ways to conserve your water usage is by using your water less. Reduce your time in the shower as much as possible to ensure you are not overusing more than you need. If you tend to lose time or stand under the showerhead doing nothing, then bring a timer or radio into the bathroom. Set goals to finish your shower within a certain number of minutes or after a specific number of songs. If you can reduce your shower time to 5 or 10 minutes, then you can save significant amounts of water.

Tip #2: Use a Low-Flow Showerhead

Low-flow showerheads can save on your water usage over time, which will save you money on your water bill. By installing a low-flow showerhead, you can reduce your water usage by up to half of what you normally use. Traditional shower heads can use over 5 gallons of water every minute. A low-flow showerhead can use as little as 2.5 gallons a minute, thus reducing your water usage by half.

Tip #3: Fix Leaky Faucets

You may think a tiny leak in your sink or shower faucets is not a big deal, but it can cost you a lot of water in the end. If you allow even one faucet to leak continuously, you risk losing hundreds of gallons of water a year. If you have multiple faucet leaks in your home, then you could be losing several gallons of water a day. Call your residential plumber to repair these leaks right away.

If you are looking for water conservation tips, then call your plumber at All Plumbing, Inc. at (703) 525-7973. With our plumbing services and waterproofing services in Arlington, VA, we can help you cut your water usage and save you money.

How to Choose a Plumber

Whether you are experiencing a plumbing emergency, or you simply want to set up preventative maintenance procedures for your home, choosing a plumber is a major decision for any homeowner. When you are choosing a new plumber, you will want to make sure that your plumbing company is fully licensed and certifications. Along with researching a plumber’s qualifications, it is also a great idea to ask them to provide you with local references. A plumber with great reviews from past clients will work diligently to make sure that your plumbing repair needs are met.

At All Plumbing, Inc., we are pleased to be a top rated plumber serving Arlington and the surrounding areas. From waterproofing to clearing a clogged toilet, there is no plumbing job that is too large or small for our team of professionals. Call our friendly service staff at (703) 525-7973 to schedule your next plumbing repair appointment.

Leave Plumbing to the Pros

When a plumbing emergency arises in your home, you may be tempted to try to fix the problem on your own. In this video, however, you will take a look at some reasons why you should always leave your plumbing repairs to the professionals. A professional plumber uses a variety of sophisticated tools to diagnose and repair your home’s plumbing system. During a professional plumbing appointment, your plumber will know how to use these tools correctly.

If you are in need of professional plumbing in Arlington, look no further than All Plumbing, Inc. From water line repair to toilet installation and more, we provide our clients with all types of plumbing services. Give us a call at (703) 525-7973 to schedule a service appointment with one of our top rated plumbers today.

Telltale Signs You Need a New Water Heater

Hot water on demand is a modern luxury that has become essential in day to day life. If your water heater fails suddenly, you may find yourself on the phone with your local emergency plumbing company. To avoid the hassle of losing hot water for a day or longer, you will want to replace your aging water heater before it fails completely. Here is an overview of some of the telltale signs that you need to purchase a new water heater for your home.

Your Water Heater Is More Than a Decade Old

A water heater is built to last for 10 years before it needs to be replaced. If you are concerned that you may need to purchase a new water heater, you can start by evaluating its age. In order to determine the age of your water heater, you can look for the date code that is stamped next to its serial number.

Your Water Heater Produces Discolored Water

All of the water that flows out of your pipes should be clear and ready for use. A water heater that is about to fail may start to produce rusty or otherwise discolored water. Hot water discoloration occurs when rust starts to build up in the collection tank. To avoid a health and safety hazard, you will want to replace your water heater immediately.

Your Water Heater Is Making Strange Noises

Finally, you can also listen carefully to your water heater to decide when it is time for a replacement. When your water heater is about to fail, it may start to clank, bang, or grumble. While some noises are common for water heaters, other signal imminent failure.

For answers to your questions about replacing your water heater in Arlington, be sure to get in touch with All Plumbing, Inc. by calling (703) 525-7973. Our plumbing company offers a full range of services, including water heater replacement and toilet repair. Our team looks forward to helping you find the right plumbing solution for your home.

Investing in a Water Saving Toilet

Water conversation is a top priority for many households. When you invest in low-flow plumbing fixtures, you can help to conserve water, while also reducing your monthly water bills. Your toilet is among the many fixtures that you may want to consider upgrading in your home. Today’s high-efficiency toilets save more water than ever before. Let’s review some tips for investing in a water saving toilet for your home.

Evaluate Low Flow Models

As you are shopping for a water saving toilet, it is a terrific idea to evaluate the different low-flow models that are available from your contractor. The low flow toilets that you can purchase today use a mere 1.6 gallons per flush. By saving gallons every time you flush, you can significantly reduce the water consumption of your household.

Create a Realistic Budget

Purchasing a new toilet will require you to create a budget for your purchase. While you may be tempted to save money on your new toilet, spending a little extra will help you ensure that you will get the best performance and reliability from your new fixture. Your plumbing contractor can help you find quality toilets that are within your price range.

Explore Different Features

When you are shopping for your new toilet, you may come across new and innovative features in your toilet design. One water saving feature that you may want to consider for your toilet installation is dual flush functionality. With a dual flush function, your toilet will allow you to control how much water you send down the drain with each flush.

In order to get started on your new toilet installation, be sure to get in touch with All Plumbing, Inc. We are thrilled to provide top rated plumbing services in Arlington, and we can help you replace your clogged toilet with a brand new model. For more information about our plumbing services, give us a call at (703) 525-7973.

Page 2 of 42 1 2 3 4 5 6 7  . . . 38 39 40 41 42   Next
©2017 All Rights Reserved.